Иностранный язык : Специфика артикуляции звуков, интонации, акцентуации и ритма нейтральной речи в изучаемом языке; основные особенности полного стиля произношения, характерные для сферы профессиональной коммуникации; чтение транскрипции. Лексический минимум в объеме 4000 учебных лексических единиц общего и терминологического характера. Понятие дифференциации лексики по сферам применения (бытовая, терминологическая, общенаучная, официальная и др.). Понятие о свободных и устойчивых словосочетаниях, фразеологических единицах. Понятие об основных способах словообразования. Грамматические навыки, обеспечивающие коммуникацию общего характера без искажения смысла при письменном и устном общении; основные грамматические явления, характерные для профессиональной речи. Понятие об обиходно-литературном, официально-деловом, научном стилях, стиле художественной литературы. Основные особенности научного стиля. Культура и традиции стран изучаемого языка, правила речевого этикета. Говорение. Диалогическая и монологическая речь с использованием наиболее употребительных и относительно простых лексико-грамматических средств в основных коммуникативных ситуациях неофициального и официального общения. Основы публичной речи (устное сообщение, доклад). Аудирование. Понимание диалогической и монологической речи в сфере бытовой и профессиональной коммуникации. Чтение. Виды текстов: несложные прагматические тексты и тексты по широкому и узкому профилю специальности. Письмо. Виды речевых произведений: аннотация, реферат, тезисы, сообщения, частное письмо, деловое письмо, биография.
Оформление служебной записки, телефонограммы, повестки дня
6
Чтение
27
Ознакомительное чтение с целью определения истинности утверждения
28
Ознакомительное чтение с целью определения ложности утверждения
29
Поисковое чтение с целью определения наличия в тексте запрашиваемой информации
30
Поисковое чтение с целью определения наличия или отсутствия в тексте запрашиваемой информации
31
Изучающее чтение с элементами анализа информации
32
Изучающее чтение с элементами аннотирования
33
Изучающее чтение с элементами сопоставления
34
Изучающее чтение с выделением главных компонентов содержания текста
Демонстрационный вариант
ЗАДАНИЕ N 1( - выберите один вариант ответа)
Заполните пропуск You can study a lot of different _____ at this university.
ВАРИАНТЫ ОТВЕТОВ:
1)
options
2)
subjects
3)
careers
4)
degrees
ЗАДАНИЕ N 2( - выберите один вариант ответа)
Заполните пропуск Let’s stop at this restaurant for a quick _____.
ВАРИАНТЫ ОТВЕТОВ:
1)
smile
2)
walk
3)
menu
4)
meal
ЗАДАНИЕ N 3( - выберите один вариант ответа)
Заполните пропуск The standard sizes of clothing are derived from _________ of large numbers of people.
ВАРИАНТЫ ОТВЕТОВ:
1)
statistical measurements
2)
statistical analysis
3)
national standards
4)
introduced uniforms
ЗАДАНИЕ N 4( - выберите один вариант ответа)
Заполните пропуск _______ is a certain type of clothing which is worn by all the members of a group of organisation.
ВАРИАНТЫ ОТВЕТОВ:
1)
Conventional
2)
Approved
3)
Uniform
4)
Suit
ЗАДАНИЕ N 5( - выберите один вариант ответа)
Заполните пропуск The man had to _______ the paint because the first coat wasn’t sufficient.
ВАРИАНТЫ ОТВЕТОВ:
1)
applicant
2)
reapply
3)
application
4)
unapplied
ЗАДАНИЕ N 6( - выберите один вариант ответа)
Заполните пропуск Your bag looks heavy! I’ll carry _______ for you.
ВАРИАНТЫ ОТВЕТОВ:
1)
them
2)
her
3)
him
4)
it
ЗАДАНИЕ N 7( - выберите один вариант ответа)
Заполните пропуск The grass there was much _____ than on the upper field.
ВАРИАНТЫ ОТВЕТОВ:
1)
the longest
2)
more long
3)
longer
4)
long
ЗАДАНИЕ N 8( - выберите один вариант ответа)
Заполните пропуск We went for a walk along _______ coast.
ВАРИАНТЫ ОТВЕТОВ:
1)
any
2)
the
3)
-
4)
an
ЗАДАНИЕ N 9( - выберите один вариант ответа)
Заполните пропуск The Pyramids were built _____ people who lived a long time ago.
ВАРИАНТЫ ОТВЕТОВ:
1)
of
2)
with
3)
by
4)
after
ЗАДАНИЕ N 10( - выберите один вариант ответа)
Заполните пропуск Security cameras are used _______ catch criminals.
ВАРИАНТЫ ОТВЕТОВ:
1)
in order to
2)
or
3)
which
4)
for
ЗАДАНИЕ N 11( - выберите один вариант ответа)
Заполните пропуск Do you want a sandwich? - No, thanks. I _____ just _____ lunch.
ВАРИАНТЫ ОТВЕТОВ:
1)
have _____ had
2)
am _____ having
3)
had _____ had
4)
was _____ having
ЗАДАНИЕ N 12( - выберите один вариант ответа)
Заполните пропуск She suggested _______ to the cinema.
ВАРИАНТЫ ОТВЕТОВ:
1)
having gone
2)
gone
3)
going
4)
to go
ЗАДАНИЕ N 13( - выберите один вариант ответа)
Заполните пропуск Paul _____ visiting his parents.
ВАРИАНТЫ ОТВЕТОВ:
1)
insisted to
2)
insisted of
3)
insisted on
4)
insisted –
ЗАДАНИЕ N 14( - выберите один вариант ответа)
Заполните пропуск _______ I park my car in your garage?
ВАРИАНТЫ ОТВЕТОВ:
1)
Are allowed to
2)
Can
3)
Need
4)
Is able to
ЗАДАНИЕ N 15( - выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Guest: .___________________.
Hostess: .Oh, I. m glad you enjoyed it..
ВАРИАНТЫ ОТВЕТОВ:
1)
The meal wasn. t as bad as I expected.
2)
Enjoy your meal.
3)
The meal was rather good.
4)
The meal was absolutely delicious.
ЗАДАНИЕ N 16( - выберите один вариант ответа)
Заполните пропуск Interviewer: Do you mind if I ask how old are you? Applicant: __________________
ВАРИАНТЫ ОТВЕТОВ:
1)
Actually, I’d rather not say. But put it this way, I’m about 40.
2)
I am not going to answer this question.
3)
Yes, I do.
4)
And what do you think?
ЗАДАНИЕ N 17( - выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Student: .Have you had time to mark my composition?.
Teacher: .__________________________.
ВАРИАНТЫ ОТВЕТОВ:
1)
Oh, dear, you look awful, what. s the matter with you?
2)
Yes, it was quite good, and I. ve underlined the mistakes you. ve made.
3)
Yes, and I do hope you don. t mind my saying this but you. ve made one or two tiny mistakes.
4)
Yes, I have.
ЗАДАНИЕ N 18( - выберите один вариант ответа)
Заполните пропуск Visitor: _________________ Local Resident: Oh, you can get a bus … any bus will take you there.
ВАРИАНТЫ ОТВЕТОВ:
1)
Where is Central Station?
2)
I’m looking for Central Station.
3)
Central Station.
4)
Excuse me … How can I get to Central Station, please?
ЗАДАНИЕ N 19( - выберите один вариант ответа)
Заполните пропуск The United Kingdom of Great Britain and Northern Ireland consists of _____.
ВАРИАНТЫ ОТВЕТОВ:
1)
four parts
2)
two parts
3)
five parts
4)
three parts
ЗАДАНИЕ N 20( - выберите один вариант ответа)
Заполните пропуск The Library of Congress is situated in _____.
ВАРИАНТЫ ОТВЕТОВ:
1)
London
2)
Oxford
3)
Boston
4)
New York
ЗАДАНИЕ N 21( - выберите один вариант ответа)
Заполните пропуск French is an official language in _____.
ВАРИАНТЫ ОТВЕТОВ:
1)
New Zealand
2)
Canada
3)
India
4)
Sweden
ЗАДАНИЕ N 22( - выберите один вариант ответа)
Заполните пропуск What’s the name of a member of the Beatles who was murdered in the USA?
ВАРИАНТЫ ОТВЕТОВ:
1)
Lennon
2)
Stevenson
3)
Rowling
4)
Mc Courtney
ЗАДАНИЕ N 23( - выберите варианты согласно указанной последовательности)
Расположите части делового письма в правильном порядке FOOD MACHINES
ВАРИАНТЫ ОТВЕТОВ:
1)
Dear Mr Sawyer,
2)
6 Pine Estate, Bedford Road, Bristol, UB28 12BP Telephone 9 Fax 9 6 August 2005
3)
Thank you for your letter. I am afraid that we have a problem with your order. Unfortunately, the manufacturers of the part you wish to order have advised us that they cannot supply it until November. Would you prefer us to supply a substitute, or would you rather wait until the original parts are again available?
4)
James Sawyer, Sales Manager, Electro Ltd, Perry Road Estate, Oxbridge UN54 42KF.
5)
I look forward to hearing from you. Yours sincerely, Simon Tramp Sales Manager
ЗАДАНИЕ N 24( - выберите варианты согласно тексту задания)
Перед Вами конверт
Соотнесите информацию под определенным номером на конверте с тем, что она обозначает.
ВАРИАНТЫ ОТВЕТОВ:
A)
the street name in the mailing address
B)
the town the letter comes from
C)
the ZIP Code in the mailing address
D)
the addressee
E)
the ZIP Code in the return address
F)
the addressee. s company name
ЗАДАНИЕ N 25( - выберите один вариант ответа)
Определите, к какому виду делового документа относится представленный ниже отрывок
ВАРИАНТЫ ОТВЕТОВ:
1)
Letter of enquiry / request
2)
CV
3)
Contract
4)
Memo
ЗАДАНИЕ N 26( - выберите варианты согласно тексту задания)
Выберите слова или сочетания слов для заполнения пропусков так, чтобы они отражали особенности оформления служебной записки
To : Secretarial Supervisor (1) _____ : Claire McElroy (2) _____ : Demonstration of new office equipment
The (3) _____ of Smart Equipment will visit us on 28 April to demonstrate their new computer and fax-machine which you are sure to be interested in. Please arrange the time to meet him so that all your staff could be present. (4) _____
ВАРИАНТЫ ОТВЕТОВ:
A)
Subject
B)
C. M.
C)
From
D)
Sales Manager
ЗАДАНИЕ N 27( - выберите один вариант ответа)
Определите, является ли утверждение:
Every dress is usually designed and made for each wearer.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
ложным
2)
истинным
3)
в тексте нет информации
ЗАДАНИЕ N 28( - выберите один вариант ответа)
Определите, является ли утверждение:
Standard sizes were used earlier in designing military uniforms.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
ложным
2)
в тексте нет информации
3)
истинным
ЗАДАНИЕ N 29( - выберите один вариант ответа)
Определите, является ли утверждение:
Standard sizes are useful for industrializing the making of clothing.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
ложным
2)
в тексте нет информации
3)
истинным
ЗАДАНИЕ N 30( - выберите один вариант ответа)
Определите, является ли утверждение:
More than the 20 common sizes are proved to be impossible, since they would lower mass production scales.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
ложным
2)
истинным
3)
в тексте нет информации
ЗАДАНИЕ N 31( - выберите один вариант ответа)
Укажите, какому из абзацев текста (1, 2, 3, 4) соответствует следующая идея:
This method is used for creating standard sizes.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
4
2)
2
3)
1
4)
3
ЗАДАНИЕ N 32( - выберите один вариант ответа)
Укажите, какому из абзацев текста (1, 2, 3, 4) соответствует следующая идея:
These measurements are used for making clothes.
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
4
2)
3
3)
1
4)
2
ЗАДАНИЕ N 33( - выберите один вариант ответа)
Ответьте на вопрос:
What standard sizes are seen in the general population?
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
The bust circumference, the natural waist circumference, the hip circumference.
2)
Neckline, waistline and hemline.
3)
20 common sizes
4)
Sleeve measurements, horizontal and vertical torso measurements.
ЗАДАНИЕ N 34( - выберите один вариант ответа)
Определите основную идею текста
Прочитайте текст DRESS SIZE
1. In clothing, dress size refers to a set of standard dimensions for a dress. Every person has unique body measurements, unique habits of movement and unique ideas of clothing, e. g., placement and shape of the neckline, waistline and hemline. Therefore, every dress should (ideally) be designed and made for each wearer by a custom dressmaker, who fits the dress to the measurements of the wearer.
2. However, the mass production of clothing in standard sizes, known as ready-to-wear, clothing was introduced. Standard sizes were also used earlier in designing uniforms. These standard sizes are purportedly arrived at by statistical analysis of large numbers of people.
3. The classification of body measurements into standard sizes has been useful for industrializing the manufacture of clothing. However, the present system is not ideal, since a significant percentage of women do not match one of the 20 common sizes. Unfortunately, more sizes and broader manufacture of styles seem unlikely, since they would likely diminish the economies of scale associated with mass production.
4. These standard sizes describe combinations of body measurements that are commonly seen in the general population. Horizontal torso measurements that can be specified include the neck circumference, the shoulder width, the over-bust circumference, the bust circumference, the bust-point separation, the under-bust (rib-cage) circumference, the natural waist circumference, the upper hip circumference and the lower hip circumference. Vertical torso measurements that can be specified include the back (neck-waist) length, the shoulder-waist length (not the same as the back length, due to the slope of the shoulder), the bust-shoulder length, the bust-waist length, and the two hip-waist lengths. Sleeve measurements that can be specified include the under-arm and over-arm lengths, the fore-arm length, the wrist circumference and the biceps circumference. (1668)
From Wikipedia, the free encyclopeadia
ВАРИАНТЫ ОТВЕТОВ:
1)
The classification of body measurements into standard sizes has helped to introduce manufacture of ready-to-wear clothing.
2)
The standard sizes are made by statistical analysis of large numbers of people.
3)
The present system of standard sizes is not ideal.
4)
The main three body measurements that are commonly seen in the general population.
- выберите варианты согласно указанной последовательности)
