ГОСТ . Метчики машинные с укороченными канавками. Конструкция и размеры

Настоящий стандарт распространяется на машинные метчики с укороченными канавками, предназначенные для нарезания метрической резьбы в сквозных отверстиях

Название на англ.:

Machine taps with shortened flutes. Design and dimensions

Тип документа:

стандарт

Статус документа:

действующий

Число страниц:

21

Дата актуализации текста:

22.03.2010

Дата актуализации описания:

22.03.2010

Дата издания:

05.09.1972

Дата введения в действие:

01.01.1974

Дата последнего изменения:

23.06.2009

Поправки и изменения:

    Изменение №1 к ГОСТ Изменение №2 к ГОСТ Изменение №3 к ГОСТ
    http://*****/wp-content/plugins/gost-db/data/371/37121/0.gif http://*****/wp-content/plugins/gost-db/data/371/37121/1.gif http://*****/wp-content/plugins/gost-db/data/371/37121/2.gif http://*****/wp-content/plugins/gost-db/data/371/37121/3.gif http://*****/wp-content/plugins/gost-db/data/371/37121/4.gif http://*****/wp-content/plugins/gost-db/data/371/37121/5.gif http://*****/wp-content/plugins/gost-db/data/371/37121/6.gif http://*****/wp-content/plugins/gost-db/data/371/37121/7.gif http://*****/wp-content/plugins/gost-db/data/371/37121/8.gif http://*****/wp-content/plugins/gost-db/data/371/37121/9.gif http://*****/wp-content/plugins/gost-db/data/371/37121/10.gif http://*****/wp-content/plugins/gost-db/data/371/37121/11.gif http://*****/wp-content/plugins/gost-db/data/371/37121/12.gif http://*****/wp-content/plugins/gost-db/data/371/37121/13.gif http://*****/wp-content/plugins/gost-db/data/371/37121/14.gif http://*****/wp-content/plugins/gost-db/data/371/37121/15.gif http://*****/wp-content/plugins/gost-db/data/371/37121/16.gif http://*****/wp-content/plugins/gost-db/data/371/37121/17.gif http://*****/wp-content/plugins/gost-db/data/371/37121/18.gif http://*****/wp-content/plugins/gost-db/data/371/37121/19.gif http://*****/wp-content/plugins/gost-db/data/371/37121/20.gif