(стр. 2 )

цитируемый документ

EROSION AND MICROSTRUCTURE CHANGE OF MATERIALS DURING DISRUPTION-SIMULATION EXPERIMENTS IN PLASMA-ACCELERATOR Author(s): KALIN BA, POLSKY VI, YAKUSHIN VL, VIRGILEV YS, VASILIEV VI, TSEREVITINOV SS Source: JOURNAL OF NUCLEAR MATERIALS Volume: 220 Pages: 934-938 Published: APR 1995  Times Cited: 5 References: 12 Abstract: The behaviour of G-4, MPG-6, MPG-8, MIG, MIG-1, SG-T, PG-MS, USB-15 graphites, boron surface-modified MPG-8 and USB-15 graphites, Ni, Fe, Ti, V, Nb, Mo, austenitic and ferritic steels, austenitic steels with Al and Be coatings have been tested by using a high temperature pulsed plasma gun to simulate plasma disruption. The heat flux of the hydrogen and deuterium plasma has been 10 to 100 J/cm(2) and pulse durations 25 mu s. Material weight loss has been estimated. Structure changes in the surface layer of the metal materials, the influence of microstructure changes on sputtering, blistering and hydrogen permeability have been investigated. Document Type: Article Language: English KeyWords Plus: CARBON-BASED MATERIALS Addresses: KALIN, BA (reprint author), MOSCOW ENGN PHYS INST, KASHIRSKOE SH 31, MOSCOW RUSSIA STATE RES INST GRAPHITE, MOSCOW RUSSIA TRINITI, TROITSK RUSSIA Publisher: ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS Subject Category: Materials Science, Multidisciplinary; Nuclear Science & Technology; Mining & Mineral Processing IDS Number: QY754 ISSN:

1 цитирование (без самоцитирования)

4. Title: Ceramic SiC/B4C/TiC/C composites as plasma facing components for fusion reactors Author(s): Yehia A, Vassen R, Duwe R, et al. Source: JOURNAL OF NUCLEAR MATERIALS  Volume: 233  Pages:  Part: Part B  Published: OCT 1996 Times Cited: 3

8.________________________________________________________________________________________________

цитируемый документ

INFLUENCE OF EXTERNAL ACTION AND STRUCTURAL FACTORS ON RADIATION BLISTERING Author(s): KALIN BA, CHERNOV II, FOMINA EP, KORSHUNOV SH, POLSKY VI, SKOROV DM, YAKUSHIN VL Source: JOURNAL OF NUCLEAR MATERIALS Volume: 132 Issue: 2 Pages: 137-146 Published: 1985  Times Cited: 2 References: 44 Document Type: Article Language: English Addresses: KALIN, BA (reprint author), MOSCOW ENGN PHYS INST, KASHIRSKOIE SH 31, MOSCOW, USSR Publisher: ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS Subject Category: Materials Science, Multidisciplinary; Nuclear Science & Technology; Mining & Mineral Processing IDS Number: AND91 ISSN:

2 цитирования (без самоцитирования)

1. Title: Mechanical characterization and modeling of brazed EUROFER-tungsten-joints Author(s): Chehtov T, Aktaa J, Kraft O Source: JOURNAL OF NUCLEAR MATERIALS  Volume: 367  Pages:  Part: Part B  Published: AUG 1 2007 Times Cited: 0 2. Title: High-temperature brazing for reliable tungsten-CFC joints Author(s): Koppitz T, Pintsuk G, Reisgen U, et al. Source: PHYSICA SCRIPTA  Volume: T128  Pages: 175-181  Published: MAR 2007 Times Cited: 1

9._________________________________________________________________________________________________

цитируемый документ

Application of amorphous and microcrystalline filler metals for brazing of beryllium with metals Author(s): Kalin BA, Fedotov VT, Sevryukov ON, Grigoryev AE, Plyuschev AN, Ivanov VM, Strebkov YS Source: JOURNAL OF NUCLEAR MATERIALS Volume: 233 Pages: 945-948 Part: Part B Published: OCT 1996  Times Cited: 4 References: 7 Abstract: Rapidly solidified (RS) amorphous and microcrystalline ribbon-type brazing filler metals (FMs) represent a promising facility for joining heterogeneous materials together. The advantage results are followed from the homogeneity of element and phase compositions and the strictly specified geometrical dimensions of such FMs. Produced by rapid solidification technology amorphous FM: Zr-Ti-Fe-Be (STEMETand microcrystalline FMs: Al-Si (STEMET 1501), Cu-Sn-Mn-In-Ni (STEMET 1120) and Cu-Sn-In-Ni (STEMET 1108) were used. Brazing of beryllium with metals (Be + Cu; Be + SS; Be + V) was performed using ribbon-type FMs. Metallographic and microprobe analysis of brazed zones suggested that components of FMs are uniformly distributed, pores and cracks are absent. Tensile strength testing of brazed joints was carried out. Document Type: Article Language: English Addresses: Kalin, BA (reprint author), MOSCOW ENGN PHYS INST, DEPT PHYS PROBLEMS MAT SCI 9, KASHIRSKOE SHOSSE 31, MOSCOW RUSSIA RES & DEV INST POWER ENGN, MOSCOW, RUSSIA Publisher: ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS Subject Category: Materials Science, Multidisciplinary; Nuclear Science & Technology; Mining & Mineral Processing IDS Number: WC643 ISSN:

4 цитирования

1. Title: Crystallization behavior of Ti61.67Zr17.15M14.80Cu6.38 glass-forming alloy Author(s): Fan JD, Gao YQ, Li SZ Source: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA  Volume: 14  Issue: 1  Pages: 156-160  Published: FEB 2004 Times Cited: 1 2. Title: Be-Cu joints based on amorphous alloy brazing for divertor and first wall application Author(s): Kalin B, Fedotov V, Sevryukov O, et al. Source: JOURNAL OF NUCLEAR MATERIALS  Volume: 271  Pages: 410-414  Published: MAY 1999 Times Cited: 3 3. Title: Microscopic observation and mechanical tests of CuNiCrSi/321 brazed joints Author(s): Ivanov AD, Krestnikov NS, Blinov YV, et al. Source: PLASMA DEVICES AND OPERATIONS  Volume: 6  Issue: 1-3  Pages: 37-44  Published: 1998 Times Cited: 0 4. Title: Development and characterisation of Be/Glidcop (R) joints obtained by hot isostatic pressing for high temperature working conditions Author(s): Saint-Antonin F, Barberi D, Le Marois G, et al. Source: JOURNAL OF NUCLEAR MATERIALS  Volume: 258  Pages:  Part: Part B  Published: OCT 1998 Times Cited: 2

10.____________________________________________________________________________________________

цитируемый документ

Influence of alloying elements in Ni and Fe on ion-implanted helium behavior Author(s): Kalin BA, Chernov II, Kalashnikov AN, Timofeyev VV Source: JOURNAL OF NUCLEAR MATERIALS Volume: 233 Pages:  Part: Part B Published: OCT 1996  Times Cited: 3 References: 38 Abstract: Behavior of ion-implanted helium and bubble microstructure evolution in Ni-base (NGC, NI-AI) and Fe-base (Fe-C) model alloys, as well as in homogeneous austenitic 16-15 type steel with various carbon contents and in age hardening 15-35 type steel as a function of alloying element concentration, have been investigated by means of thermal desorption spectrometry (TDS) and transmission electron microscopy (TEM). The results show the different nature of influence of carbon and aluminium on bubble parameters formed during postirradiation annealings. Calculated by means of the 'tempering' method, helium release effective activation energy proved to be higher for alloys than for pure metals. The effect of these observations is discussed from the standpoint of diffusion parameter change in metals by alloying. Document Type: Article Language: English KeyWords Plus: THERMAL-DESORPTION; NICKEL; BUBBLES; METALS; MICROSTRUCTURE; SPECTROMETRY; IRRADIATION; CARBON; GAS Addresses: Kalin, BA (reprint author), MOSCOW ENGN PHYS INST, KASHIRSKOE SH 31, MOSCOW RUSSIA Publisher: ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS Subject Category: Materials Science, Multidisciplinary; Nuclear Science & Technology; Mining & Mineral Processing IDS Number: WC643 ISSN:

2 цитирования (без самоцитирования)

1. Title: Defect production and formation of helium-vacancy clusters due to cascades in alpha-iron Author(s): Yang L, Zu XT, Xiao HY, et al. Source: PHYSICA B-CONDENSED MATTER  Volume: 391  Issue: 1  Pages: 179-185  Published: MAR Times Cited: 1 2. Title: Defect production and formation of helium-vacancy clusters in cascades of alpha-iron with different concentration of helium Author(s): Li Y, Zu XT, Xiao HY, et al. Source: ACTA PHYSICA SINICA  Volume: 54  Issue: 10  Pages:  Published: OCT 2005 Times Cited: 0

11.__________________________________________________________________________________________________________

цитируемый документ

SPUTTERING OF SURFACE-BORONIZED GRAPHITE BY HYDROGEN-ION BOMBARDMENT Author(s): KALIN BA, YAKUSHIN VL, POLSKY VI, VIRGILEV YS Source: JOURNAL OF NUCLEAR MATERIALS Volume: 212 Pages:  Part: Part B Published: SEP 1994  Times Cited: 1 References: 5 Abstract: The findings of investigation into chemical and physical sputtering of various graphite materials which can be used as protection materials for the first wall of a thermonuclear reactor are presented. Sputtering of hydrogen ions with energy of 9 keV has been carried out in temperature range of 330-870 K. It has been shown that surface boronizing by the method of chemical transport reactions of MPG-8 graphite decreases chemical sputtering in 2.5-3 times. Deposition of the same coat on carbon glass-ceramic of USB-15 type fully suppresses its chemical sputtering in all temperature range. In the process of sputtering an intensive growth of whiskers composed only of carbon atoms has been observed. Document Type: Article Language: English Addresses: KALIN, BA (reprint author), MOSCOW ENGN PHYS INST, MOSCOW RUSSIA SCI INST GRAPHITE, MOSCOW, RUSSIA Publisher: ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS Subject Category: Materials Science, Multidisciplinary; Nuclear Science & Technology; Mining & Mineral Processing IDS Number: PL245 ISSN:

1 цитирование

1. Title: Erosion and surface morphology of graphite materials under high flux beam irradiation Author(s): Ueda Y, Sugai T, Shiota K, et al. Source: JOURNAL OF NUCLEAR MATERIALS  Volume: 258  Pages: 628-633  Part: Part A  Published: OCT 1998 Times Cited: 3

12.________________________________________________________________________________________________

цитируемый документ

DEPOSITION OF CHEMICAL ELEMENTS FILMS WITH USE OF NEODYMIUM GLASS LASER Author(s): BOYAKOV VM, EPIKHIN VM, KALIN BA, MAKHATOV MK, NIKOLAEV IN, SHISHKIN GN Source: KVANTOVAYA ELEKTRONIKA Volume: 5 Issue: 7 Pages:  Published: 1978  Times Cited: 3 References: 9 Document Type: Note Language: Russian Addresses: BOYAKOV, VM (reprint author), MOSCOW ENGN PHYS INST, MOSCOW, USSR Publisher: LEBEDEV PHYSICAL INST KVANTOVAYA ELEKTRONIKA JOURNAL, LENINSKII PROSPEKT 53, 117924 MOSCOW GSP-1, RUSSIA Subject Category: Engineering, Electrical & Electronic; Physics, Applied IDS Number: FJ023 ISSN:

3 цитирования

1. Title: FORMATION OF SEMICONDUCTOR-FILMS FROM EROSIVE LASER PLASMA AT SCATTERING BY THE HEATED SCREEN Author(s): GAPONOV SV, GUDKOV AA, LUSKIN BM, et al. Source: ZHURNAL TEKHNICHESKOI FIZIKI  Volume: 51  Issue: 5  Pages:  Published: 1981 Times Cited: 2 2. Title: INVESTIGATION OF THE CONTACT REGION OF HETEROGENEOUS METALS BY THE ELECTRON-DIFFRACTION METHOD Author(s): EPIKHIN VM, ZAVYALOVA AA, IMAMOV RM, et al. Source: KRISTALLOGRAFIYA  Volume: 26  Issue: 1  Pages: 151-&  Published: 1981 Times Cited: 0 3. Title: SPIN POLARIZATION EFFECTS OF CONDUCTIVE ELECTRONS IN CO, NI, GD, DY, CR Author(s): EPIKHIN VM, ZAVYALOVA AA, IMAMOV RM, et al. Source: FIZIKA TVERDOGO TELA  Volume: 22  Issue: 9  Pages:  Published: 1980 Times Cited: 0

13.______________________________________________________________________________________________