Digital Key Telephone System LDK-300 Programming Manual (стр. 25 )

8.2.3 RING GROUP ATTRIBUTE

PROCEDURE

STATION GRP ASSIGN ENT HUNT NO (VVV - VVV)	(1)  TRANS/PGM] + 191. Note: To program this, first, assign a station group to Ring hunt group by PGM 190.
RING GRP 624 PRESS FLEX_KEY (1-10)	(2)  Enter Station Group Number (Ex. 624, If user set 624 to Ring group). Press one of 10 Flex. BTNs and enter desired value of the group feature.
RING 624 ANNC 1 TMR (000 – 999) : 015	(3)  To assign VMIB Announce 1 Timer, press Flex. BTN 1 and enter three digits.
RING 624 ANNC1 LOC VMIB MSG– 70 )	(4)  To assign VMIB Announce Location 1, press BTN 3 and enter VMIB number. Press the [HOLD/SAVE] button to save it.
RING 624 ANNC 2 RPT (1 : ON/ 0: OFF) : OFF	(5)  To assign VMIB Announce 2 Repeat E/D, choose flex BTN 6 and enter desired value. Press the [HOLD/SAVE] button to save it.
RING 624 MUSIC SRC (00 – 12) : 00	(6)  To assign Music Source, choose flex BTN 10 and enter two digits. Press the [HOLD/SAVE] button to save it.
RING GRP 624 PRESS FLEX_KEY (1-10)	(7)  Press the [HOLD/SAVE] button for updating database permanently. For another group’s setting, first assign type of a group number by PGM 190 and go step (1) and continue this process.
	RING GRP 624 PRESS FLEX_KEY (1-10)	l  Press the [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory.

BTN	ITEM	RANGE	DEFAULT	REMARK
1	VMIB Announce 1 Timer	000-999	015 (sec)	If this timer expires after a call is received in the group, the system announces the greeting if exists.
2	VMIB Announce 2 Timer	000-999	000 (sec)	The second announcement can be provided if the call continues to wait beyond the 2nd announcement timer.
3	VMIB Announce Location 1	00-70	00 (Not Assigned)	This is used to announce the greeting when the VMIB announce 1 timer is expired.
4	VMIB Announce Location 2	00-70	00 (Not Assigned)	This is used to announce the greeting when the VMIB announce 2 timer is expired.
5	VMIB Announce 2 Repeat	000-999	000 (sec)	This is used to announce the greeting 2 when the timer is expired. (1 Sec Base)
6	VMIB Announce 2 Repeat Enable/Disable	ON/OFF	OFF	This is used to enable or disable VMIB Announce 2 Repeat.
7	Overflow Destination	STA#./ HUNT#/ VMIB# / SYS SPD #		The call to a station in the group will continue to route until answered or each station in the group has been tried. The call will remain at the last station in the group or will be passed to this overflow destination (Station/Hunt/VMIB/System Speed bin).
8	Overflow Timer	000-600	180 (sec)	If this timer expires after a call is received in the group, the call is routed to the overflow destination.
9	Wrap Up Timer	002-999 (3 digits)	002 (sec)	A station in a hunt group is maintained in a busy state for min. 2 seconds after any call for the assigned wrap-up time.
10	Music Source	00-12	00	If music source is assigned, calling user will be heard music instead of ring back tone. 00: Not Assigned 01: Internal Music 02: External Music 1 03: External Music 2 04: External Music 3 05: VMIB BGM 1 06: VMIB BGM 2 07: VMIB BGM 3 08: SLT 1 09: SLT 2 10: SLT 3 11: SLT 4 12: SLT 5
11	Max. Queued Call Count	00-99	00	Maximum number of queued call in the ring group

TABLE 8.2.3.1 Button Configuration for Ring Group Attribute (PGM 191)

8.2.4 VM GROUP ATTRIBUTE

PROCEDURE

STATION GRP ASSIGN ENT HUNT NO (VVV - VVV)	(1)  [TRANS/PGM] + 191. Note : To program this, first, assign a station group to VM group by PGM 190.
VM GRP 626 PRESS FLEX_KEY (1-7)	(2)  Enter Station Group number (Ex. 626, If user sets 626 to VM group). Press one of 7 Flex. BTNs and enter desired value of the group feature.
VM 626 WRAP UP TMR (006 – 999) : 002	(3)  To assign Wrap-up Timer, press Flex. BTN 1 and enter three digits. Press the [HOLD/SAVE] button to save it.
VM 626 PUT MAIL INDEX (1 – 4) : 1	(4)  To assign Put Mail Index, press Flex. BTN 2 and enter one digit (1-4). Press the [HOLD/SAVE] button to save it.
VM 626 HUNT TYPE (1 : CIRC/ 0 : TERM) : TERM	(5)  To assign Hunt Type, press Flex. BTN 4 and enter desired value. Press the [HOLD/SAVE] button to save it.
VM 626 OVERFLOW DEST STA/HUNT/VMIB (1-4)	(6)  To assign Overflow Destination, press Flex. BTN 7 and enter one digit. l  Dial ‘1’ to enter station number, l  Dial ‘2’ to enter Hunt group number, l  Dial ‘3’ to enter VMIB number, l  Dial ‘4’ to enter System Speed number. l  Press the [SPEED] button for deleting. Press the [HOLD/SAVE] button to save it.
VM 626 OVERFLOW DEST STA 147	l  For example, dial 1 and enter station number 147. Press the [HOLD/SAVE] button to save it.
VM GRP 626 PRESS FLEX_KEY (1-7)	(7)  Press the [HOLD/SAVE] button for updating database permanently. For another group’s setting, first assign type of a group number by PGM 190 and go step (1) and continue this process.
VM GRP 626 PRESS FLEX_KEY (1-7)	l  Press the [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory.

BTN	ITEM	RANGE	DEFAULT	REMARK
1	Wrap-up Timer	002-999 (3 Digits)	002 (sec)	A station in a hunt group is maintained in a busy state for min. 2 seconds after any call and for hunt group calls for the assigned wrap-up time.
2	Put Mail Index	1 -4	1	This index is one of the voice mail dialing tables
3	Get Mail Index	1 -4	2	This index is one of the voice mail dialing tables
4	Hunt Type	CIRC /TERM	TERM	1: Circular Hunt Group 0: Terminal Hunt Group
5	SMDI Port	01-13	02 (COM2)
6	Overflow Timer	(3 Digits)	180 (sec)	If this timer expires after a call is received in the group, the call is routed to the overflow destination.
7	Overflow Destination	Sta #/ HUNT #/ VMIB# / SYS SPD #	-	The call to the group will continue to be reroute until reaching the last station in the group where the call will remain or can be sent to this overflow destination (Station/Hunt group/VMIB/ System Speed bin).

TABLE 8.2.4.1 Button Configuration for Voice Mail Group Attribute (PGM 191)

8.2.5 PICK-UP GROUP ATTRIBUTE

PROCEDURE

STATION GRP ASSIGN ENT HUNT NO (VVV - VVV)	(1)  [TRANS/PGM] + 191. Note: To program this, first, assign a station group to Pick Up group by PGM 190.
PICK UP GRP 625 PRESS FLEX_KEY (1-2)	(2)  Enter Station Group number (Ex. 625, If user sets 625 to Pick-up group). Press one of 2 Flex BTNs and enter desired value of the group feature.
PICK UP 625 AUTO PICK UP (1 : ON/ 0: OFF) : OFF	(3)  To assign Auto Pick-up, press Flex. BTN 1 and enter desired value. Press the [HOLD/SAVE] button to save it.
PICK UP 625 ALL RING (1 : ON/ 0: OFF) : OFF	(4)  To assign All Ring, press Flex. BTN 2 and enter desired value. Press the [HOLD/SAVE] button to save it.
PICK UP GRP 625 PRESS FLEX_KEY (1-2)	(5)  Press the [HOLD/SAVE] button for updating database permanently. For another group’s setting, first assign type of a group number by PGM 190 and go step (1) and continue this process.
PICK UP GRP 625 PRESS FLEX_KEY (1-2)	l  Press the [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory.

BTN	ITEM	RANGE	DEFAULT (LED)	REMARK
1	Auto Pickup	ON/OFF	OFF	If a hunt member is ringing, another hunt member can pickup the call automatically only by pressing [MON] button or off-hook.
2	All Ring	ON/OFF	OFF	When a hunt member that is Tone mode is ringing, all other stations are ringing also. Auto Pickup feature must be set before All Ring is set.

TABLE 8.2.5.1 Button Configuration for Pick-up Group Attribute (PGM 191)