Digital Key Telephone System LDK-300 Programming Manual (стр. 31 )

13.2 QSIG Supplementary Attribute (PGM 321)

PROCEDURE

QSIG SUPPLIMENTARY ATTR PRESS FLEX KEY(1-1)	(1)  [TRANS/PGM] + 321
QSIG TRANSFER MODE (1:RERT/ 0:JOIN): JOIN	(2)  To program Qsig Supplementary Attribute, Press the Flex Btn 1-1. Related message will be displayed on LCD.
QSIG TRANSFER MODE (1:RERT/ 0:JOIN): RERT	(3)  Press the [HOLD/SAVE] button for saving database permanently.
QSIG SUPPLIMENTARY ATTR PRESS FLEX KEY(1-5)	l  Press [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory.

BTN	ITEM	RANGE	DEFAULT	REMARK
1	QSIG Transfer Mode	RERT/JOIN	JOIN	Only CT by Join is possible

TABLE 13.2.1 QSIG Supplementary Attribute (PGM 321)

13.3 QSIG Co line Attribute (PGM 322)

PROCEDURE

QSIG COLINE ATTRIBUTE ENTER COL RANGE	(1)  [TRANS/PGM] + 322
001-002 QSIG COL PGM PRESS FLEX_KEY (1-3)	(2)  Enter CO line range (Ex. 001-002).
	To program, press the Flex. BTN. Press BTN 1-3 and enter related data, then entered data will be displayed on the LCD.
001-002 QSIG CO GRP (00 – 72) : 00	(3)  Press Flex. BTN 1 and assign QSIG Co Group.
001-002 QSIG CO GRP (00 – 72) : 01	(4)  Press the [HOLD/SAVE] button for saving database permanently.
001-002 QSIG COL PGM PRESS FLEX_KEY (1-3)	l  Press [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (2) without updating system memory.

BTN	ITEM	RANGE	DEFAULT	REMARK
1	QSIG CO Group	00 - 72	00	QSIG CO group programming for QSIG call between LDK systems.
2	QSIG CO OutSend	ON / OFF	OFF	CO range programming for CO line sharing at slave system. This field is programmed at slave system for using ISDN CO lines on master system.
3	QSIG Co OutTrans	ON / OFF	OFF	CO range programming for CO line sharing at master system. This field is programmed at master system for ISDN CO lines to be shared from slave system.

TABLE 13.3.1 QSIG Co line Attribute (PGM 322)

13.4 QSIG Attendant Assignment (PGM 323)

PROCEDURE

	QSIG ATD ASSIGNMENT . .	(1)  [TRANS/PGM] + 323
	QSIG ATD ASSIGNMENT . .	(2)  To assign QSIG Attendants (one of 1-5), press the Flex. BTN. Enter the station number, then assigned system attendant station number will be displayed on the LCD. Otherwise to delete any system attendant, press the Flex. BTN, which want to delete and press the [SPEED] button.
	QSIG ATD ASSIGNMENT . .	(3)  press the Flex. BTN 2. And the procedure is the same as system attendant assignment.
	QSIG ATD ASSIGNMENT . .	(4)  Press the [HOLD/SAVE] button for updating database permanently.
QSIG ATD ASSIGNMENT . .	l  Press the [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory

13.5 QSIG Routing Table (PGM 324)

PROCEDURE

	QSIG ROUTING TABLE ENTER BIN NO (001 – 100)	(1)  [TRANS/PGM] + 324.
	001 ROUTING TABLE PRESS FLEX KEY (1 – 6)	(2)  To assign QSIG Routing Table, Dial the Table number user want to program.
		To program, press the Flex. BTN. Press BTN 1-6 and enter related data, then entered data will be displayed on the LCD.
	001 SYSTEM USAGE (1 : VOIP/0:QSIG) : QSIG	(3)  Press Flex Btn 1 and Select System Usage.
	001 CPN INFORMATION F1:ADD F2:MODIFY F3:DEL	(4)  Press Flex Btn 6 and User can program CPN information.
	001 CPN INFO ADD INPUT: ………………..	(5)  To add CPN information in Routing Table 001, press Flex Btn 1 and dial information
	001 CPN INFORMATION F1:ADD F2:MODIFY F3:DEL	(6)  Press the [HOLD/SAVE] button for updating database permanently.
QSIG ROUTING TABLE ENTER BIN NO (001 – 100)	l  Press the [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory

BTN	ITEM	RANGE	DEFAULT	REMARK
1	System Usage	VOIP / QSIG	QSIG	Select Routing Table Usage
2	CO Group	00 – 72	00	To use the QSIG CO group number programmed by PGM322-BTN 1.
3	Start Range	8digits	-
4	End range	8digits	-
5	Ip Address	12digits	-	Called party IP Address in VOIP
6	CPN Information	F1-F3
	1	Add			Add CPN Item
2	Modify			Modify CPN Item
3	Delete			Delete CPN Item

TABLE 13.5.1 QSIG Routing Table (PGM 324)

14. VOIB ATTRIBUTE

14.1 VOIP IP SETTING (PGM 340)

PROCEDURE

VOIP IP SETTING F1:BRD1 F2:BRD2 F3:BRD3	(1)  [TRANS/PGM] + 340.
	To program the first VOIB, Press Flex Btn 1
VOIB 1 NET SETTING PRESS FLEX KEY (1-5)	(2)  To program IP Address of VOIB 1, Press Flex Btn 1
IP ADDR(SKIP:#) 165.1	l  To skip entering digit, press #.
IP ADDR(SKIP:#) 165.1	(3)  Press the [HOLD/SAVE] button for saving database permanently.
VOIB 1 NET SETTING PRESS FLEX KEY (1-5)	l  Press [CONF] button instead of the [HOLD/SAVE] button, then system goes to step (1) without updating system memory.

BTN	ITEM	INTERCOM RANGE	DEFAULT	REMARK
1	IP ADDR(SKIP:#)	12 Digits
2	GATEWAY ADDR(SKIP:#)	12 Digits
3	SUBNET MASK(SKIP:#)	12 Digits
4	DNS ADDR(SKIP:#)	12 Digits
5	TRACE PASSWORD	10 Digits

TABLE 14.1.1 VOIB IP SETTING (PGM 340)