Digital Key Telephone System LDK-300 Programming Manual (стр. 7 )

PROCEDURE

FLEX NUMBERING PLAN A PRESS FLEX KEY (01-24)	(1)  [TRANS/PGM] + 106. You can program the 24 Flex. Numbers. Table 2.7.1 illustrates the programmable list of the 24 flexible Numbering plan used by PGM 106 and Table 2.7.2 illustrates the list for PGM 107.
STA GRP PILOT NUMBER START & END #(620-667)	(2)  To change a numbering plan, press the related flexible button. Each code length is in 1~4 digits.(To enter station range, 2 ~ 8 digits) For example, press Flex. BTN 1 to change Station Group pilot number. Dial the first station group pilot number and last station group pilot number, and press the [HOLD/SAVE] button. Then you can see the changed station group pilot numbers on the LCD. If you press other Flex. BTN, you can assign other numbering plan.
STA GRP PILOT NUMBER START & END #(620-667)	(3)  If you want to save all changed flexible numbers to system memory, press the [HOLD/SAVE] button. There are no errors in the Flexible Numbers, then confirmation tone will be heard.
	If some errors are detected, then error tone will be heard without updating system memory.

BTN	LCD DISPLAY	ITEM
1	STA GRP PILOT NUMBER START & END #(620-667)	Station Group Pilot Number
2	INT PAGE ZONES START & END #(501-530)	Internal Page Zone Number
3	INT ALL CALL ENTER NEW #(543)	Internal All Call Page
4	MEET ME PAGE ENTER NEW #(544)	Meet Me Page
5	EXT PAGE ZONE 1 ENTER NEW #(545)	External Page Zone - 1
6	EXT PAGE ZONE 2 ENTER NEW #(546)	External Page Zone - 2
7	EXT PAGE ZONE 3 ENTER NEW #(547)	External Page Zone - 3
8	EXT ALL CALL ENTER NEW #(548)	External All Call Page
9	ALL CALL PAGE ENTER NEW #(549)	All Call Page (Internal/External)
10	SMDR ACT CODE ENTER ENTER NEW #(550)	SMDR Account Code Enter
11	FLASH CMD TO CO ENTER NEW #(551)	Flash Command to CO Line
12	SLT LAST SPD DIAL ENTER NEW #(552)	Last Number Redial (LNR)
13	DND ENTER NEW #(553)	Do-Not-Disturb
BTN	LCD DISPLAY	ITEM
14	CALL FWD ENTER NEW #(554)	Call Forward
15	SPD DIAL PGM ENTER NEW #(555)	Speed Dial Program
16	MSG WAIT ENABLE ENTER NEW #(556)	MSG Wait/Call-Back Enable
17	MSG WAIT RETURN ENTER NEW #(557)	MSG Wait/Call-Back Answer
18	SPD DIAL ACCESS ENTER NEW #(558)	Speed Dial Access
19	DND/FWD CANCEL ENTER NEW #(559)	Cancel DND/CFW/Pre-selected MSG Features
20	SYSTEM HOLD ENTER NEW #(560)	System Hold
21	STA RELOC BACKUP ENTER NEW #(561)	Backup STA Relocation
22	STA RELOC RETRIEVE ENTER NEW #(562)	Retrieve STA Relocation
23	SLT PGM MODE ENTER ENTER NEW #(563)	SLT Program Mode Select
24	ACD REROUTE ENTER NEW #(564)	ACD Reroute

TABLE 2.7.1 Flex Numbering Plan A (PGM 106)

BTN	LCD DISPLAY	ITEM
1	ALARM RESET ENTER NEW #(565)	Alarm Reset
2	GROUP CALL PKUP ENTER NEW #(566)	Group Call Pick-Up
3	UCD DND ENTER NEW #(568)	UCD Group DND
4	NIGHT ANSWER ENTER NEW #(569)	Night Answer
5	CALL PARK LOCATIONS START & END #(601-619)	Call Park Locations
6	DIRECT CALL PKUP ENTER NEW #(7)	Direct Call Pick-Up
7	ACCESS CO GROUP FEAT START & END #(801-872)	Access CO Group
8	ACCESS IND CO FEAT START&END #()	Access Individual CO Line
9	TIE ROUTING ACCESS ENTER NEW #(8901)	Tie Routing Access
10	ACCESS HELD CO FEAT ENTER NEW #(8*)	Access Held CO Group
11	ACCESS HELD IND CO FEAT START&END # (8#001- 8#370)	Access Held Individual CO Line
12	ACCESS CO IN 1ST CO GRP ENTER NEW #(9)	Access to CO line in the 1st available CO Group
13	ATTENDANT CALL ENTER NEW #(0)	Attendant Call
14	DOOR OPEN 1 ENTER NEW #(#*1)	Door Open – 1
15	DOOR OPEN 2 ENTER NEW #(#*2)	Door Open – 2
16	DOOR OPEN 3 ENTER NEW #(#*3)	Door Open – 3
17	DOOR OPEN 4 ENTER NEW #(#*4)	Door Open – 4
18	DOOR OPEN 5 ENTER NEW #(#*5)	Door Open – 5
19	DOOR OPEN 6 ENTER NEW #(#*6)	Door Open – 6
20	DOOR OPEN 7 ENTER NEW #(#*7)	Door Open – 7
21	VM MSG WAIT ENABLE ENTER NEW #(*8)	VM MSG Wait Enable
22	VM MSG WAIT CANCEL ENTER NEW #(*9)	VM MSG Wait Cancel

TABLE 2.7.2 Flex Numbering Plan B (PGM 107)